Flashing Tutorial for MT65x3 devices New SP FLASH TOOL.

IN CONTINUATION WITH MICROMAX A52 ROOTING-

After the Release of  the new Android Platform MT65x3 the New Version Of the SP-FLASH TOOL WAS RELEASED in order to flash the new variety of devices .

Before Anything i must tell you that this MT65x3 SERIES  supports USB data cable flashing , without wasting your time searching for the UART cable .

By this new version release of the SP-FLASH Tool , you can flash parts of you ROM [Device's] . Apart from the NAND flashing , the process below and the pictures will make you friendly with it . You may also use the New version to flash custom Rom's and much it ca also be used to break root Access if required .

• So here's the process :-Make sure all the drivers which are provided in the tutorial before are installed . 
• Open the SP-FLASH TOOL 
• Keep in mind to mark USB mode Under Options Tab .

• You are provided with a scatter file in the previous post laod that by pressing scatter loading .and ignore any message if appears on the display.

After loading the scatter file Load the Part of the ROM which you want to Flash in your MT65x3 device , and choose the file , in MMX A52 case select the BOOT.IMG . 

• Switch-off your Device by removing directly its Battery and replacing after 5-10 seconds . with the phone fully switched off press F9 (Or hit the download button ) to start the DOWNLOAD process and when the countdown begin connect the USB data cable in your phone .
• The Download of the chosen option will begin , after that a popup with a green circle should appear on the screen stating the function is complete .

Please follow the steps carefully , this is just a reference Article do not completely follow these steps , follow the steps which are on the page which provided you with this link . HAVE FUN ;)